Call Me: +91 98159 42087

Miniature Circuit Breaker / Push Button Circuit Breaker

Miniature Circuit Breaker-cum-ON/OFF Switch

Miniature Circuit Breaker - Snap-fit     Miniature Circuit Breaker - Scew-in

      Miniature Circuit Breaker – Snap fit                     Miniature Circuit Breaker – Screw in

PORTEX-Precision is a miniaturized precision thermal circuit breaker with a ROCKER actuated ON/OFF switch. This provides the dual benefits of operating the it as a regular ON/OFF switch as well as an overload circuit breaker for the protection of equipment.

It is connected in series with the load and protects against over-current caused by any fault condition in the circuit or equipment, overload, misuse, voltage fluctuation, etc., by tripping and breaking supply when amps. load increases beyond maximum specified limit.

This Circuit Breaker is Patented in India and is fully designed, developed and manufactured in India. No Chinese components have been used.

Operating Mechanism: It has a reliable over-centre trip mechanism, actuated by a separate bimetallic heater system, housed in an insulated compartment. This design results in minimal heat loss and fast sensing of over-current, thereby, ensuring extremely rapid and accurate overload performance and complete safety during fault conditions. In the event of an overload, the normally closed contacts open with a “snap action” to interrupt the current, and the ON/OFF rocker switch moves to the OFF position. Pressing this ON/OFF rocker switch to the ON position resets the over-centre trip mechanism and restores the supply.

Push Button Circuit Breaker

Push Button Circuit Breaker

Push Button Circuit Breaker

PORTEX Single Button Circuit Breaker is a single pole, precision thermal circuit breaker with a push to reset button on top. This circuit breaker has a threadneck panel mounting arrangement which can be fitted in any 9mm hole with the plastic knurled nut.

Operating Mechanism: It is the same as the Rocker Actuated Circuit Breaker. The contacts open and close with a “snap action”. The push button clearly extends out when the circuit breaker trips and pressing it resets the trip mechanism and restores the supply.

Special Features:

  • Rocker ON/OFF switch cum over-current protection Circuit Breaker
  • Specially designed to work in low ampere conditions
  • Can  be fitted in any switch board cavity to replace a normal ON/OFF switch
  • Easy installation with two screws or push-fit mounting without screws
  • Snap action opening and closing of contacts without chattering or sparking
  • Minimal heat loss, accurate and precise operation
  • Due to manual restarting, operator has to rectify fault before switching ON
  • Non-tamperable, factory pre-set calibration, cannot be altered
  • Available current rating from 1A to 20A in increments of 0.5A

ADVANTAGES of MINIATURE THERMAL circuit breaker over MCB type circuit breaker

Portex Miniature Circuit Breaker MCB type Circuit Breaker Why Portex-Precision is superior
Designed for Dual Function Specially designed dual function device which can be used as a regular ON/OFF switch as well as an overload protection switch.
Longer Life with Special Switching Mechanism Specially designed for continuous use as a manual switch, over a long period of time. MCB type circuit breaker get damaged very quickly after repeated usage.
Extremely Reliable and Accurate Thermal Operating Mechanism Specially designed for minimal heat loss due to insulated heater compartment for the bimetal, thereby, providing a very reliable and accurate thermal operating mechanism. Once calibrated for a rated ampere load, this device always trips within 20% overload current. Heat loss in MCB circuit breakers makes them extremely unreliable, sometimes not even tripping at 50% overload current
Designed for Extremely Low Current Ratings Specially designed for very low current ratings of 0.5A, 1A, 1.5A, 2A, 2.5A, in increment of 0.5A till 20A. The lowest MCB current rating available is 6A.
Greater Accuracy in Precision Controls PORTEX-Precision circuit breakers operate within overloads of 20%. Throughout the world, the industry standards of various manufacturers of thermally operated circuit breakers specify a “must trip” point of 35% overload or more. In comparison, our devices are calibrated to carry rated current continuously but “must trip” within an overload of 1% to 20% at 30 degrees C ambient temperature.
Increased Reliability due to no Mechanical Latching Specially designed with no mechanical latching for holding the contacts in the closed position. The contacts stay in the closed position due to the over-centre mechanism, which snaps open the contacts when the bimetal heats up and changes the over-centre angulation. Hence, the problems of unreliability due to latch wear-out and change in latch release characteristics due to friction are eliminated. Mechanical latching in MCB circuit breakers makes them extremely unreliable.

Illustrative list of Applications

  • Protection of all industrial, commercial and domestic equipment against excessive amps. load.
  • Motors, pumps, electrically driven equipment, appliances etc. protection against over-current due to overload, stalling, low or high voltage, failure to start, locked rotor, single phasing etc.
  • All power supply equipment, e.g., UPS, Invertors, SMPS Power supply, Voltage Stabilizers, etc.
  • Business Machines
  • Lab Equipment
  • Computers
  • Battery Chargers
  • Instrumentation
  • Machine Tools
  • Industrial Machinery
  • Medical Equipment
  • Power Tools
  • Industrial Electronics
  • Testing Equipment
  • Generators

Click here to see the Technical Specifications of the Miniature Circuit Breaker.